Видео

My '95 F350 crew cab has 651,000 mile - and counting.

You made that look way to easy man. I did one 5 years ago and it took me almost 6 hours, had to customize a wrench for the bango. My damn fingers were sliced to hell and back too.

I personally change the oil in mine. First time I did it it came out way thicker than the rest of the oil. So I pump it out using a hand pump from a shampoo bottle.. when I refill I use hotshots anti stiction . And fill it full of that. Rest of bottle in crank case.. first time I used it omg after 25-50 miles my truck runs way better my buzz test is now perfect. Idles way way smoother and quieter. I will always change my hpop oil. Idk what anyone says. I’m a mechanic of over 20 years and have seen the difference on my own dinosaur..

I’m having trouble with the pin not coming out of the shifter

This dudes switched on!

What happens if the plunger falls in the engine ???

👍👍👍👍👍👍👍✅👍👍👍

What's going on in this video? Give me the video in the dark with no volume rolling around on the engine and you Barrel rolling across the engine

Thank you for you video it gives good info. I have a question and hope you can help me, I installed a high idle switch to my F550 2002 7.3 automatic truck, when I drive it and park it, I turn on the switch it turns on and it works. The next morning I start the truck I wait to warm it up (5min) I turn on the switch it doesn't turn on. BUT I take it for a drive just around the block and than park it, I turn on the switch and it works. Can you give me an idea what it may be occurring? Hope to hear from you soon. thanks!

Ccv

Great video ! I wonder if it's the same for Canadian models. Mine has 386 kms. Wonder what will happen at 4???

Awesome

Nah 250cc can make over 600 with a big enough turbo.

THANK YOU. !!

Dude… you gotta finish the series. Great info, now tell me how this oil pressure plays a part with the fuel injectors. Great info so far. I just learned a ton!

Was looking for a better way than a row of gauges down the A pillar... Also don't have the rpm from factory as it's a cutaway which is similar to the club wagon/van...

Thanks for the video!! Very simply but precise steps, Smooth accuracy he did well! Changed the supportcenter for my 2011 Dodge Dakota 💯

Excellent video thanks

Nice explanation

Thanks for the great video. It made the job much easier.

Thank you so much You help me so much

your forgeting about the early 99s

Upgrading my 97 F350 soon, will any year 03-07 6.0 transmission cooler fit? Plan on looking a salvage yards to save $$$

I need to rebuild my hpop... So the fuel bowl might as well come out and get new seals and while I'm at it I'll do the lift pump in the valley and since the turbo is in the way that might as well come out and get new seals and since that's out I might as well fix the oil supply end caps x4

Every time I feel like I've gotten all the seals on the 7.3L ordered, there is always one or more that I missed...seems never ending...

That was really cool thanks I've never had it shown like this but in my mind I new thats how it worked only took me 26 years of doing it !!

Is that an old style ranch hand rear bumper?

Thank you so much! After watching your video I was able to replace both my cables. I saved $750. Thank you Thank you!

No dampener under the turbo like CA cars.

Nice job

No voice!

Looks a lot easier than I thought. I'll give it a go. Thank you sir!

Great video!

Where I live I just need something I can wash. Filters are expensive and do not last long on shared dirt roads. I have run foam oiled UNI filters and have super clean intakes on our Toyotas

Buy a ball joint separator for 20 bucks at harbor freight. Best investment for these trucks as they chew tie rods up. Also buy the lifetime warranty ones and the Firestone lifetime alignment unless you know how to align yourself

Thanks bro lots of good info

Please, maybe you can help me. I need an adjuster in a equalizer bar. I have the same truck, but it's a Dooley. I have a 93.

from New 🆕 Jersey good job my friend I, send to you my like 👍 GOD bless you and your family thank you 🙏

Navistar had heads in a big dark hole. Aka black holes in space for putting a lift pump there should have been by tank !

Diesel Engine is 👑

ive been searching and searching for this info thank you for making this! ive got 250/200 and was concerned my pulse width was to low

I have oil in the coolant. I have to do mine next weekend. I just bought a new oem cooler and oem seals. It’s overkill, but that oil in the coolant really got to me man

Can anyone help? I replaced my pump and fuel bowl assembly. It cranked up and was idling rough then stalled out and I haven’t been able to get it to start since

I’m having problems with my 97 f250 fuel system. The previous owner put a aftermarket fuel system with a fuel filter. I have cold no start not sure what to do. Replace the CPS and batteries along with fuel pump.

I asked for a 94 Ford ranger video not a full size truck dummy

This is an amazing presentation, well done 👍🏼

Nice sharing

Can someone explain how he was cranking the engine over with a screwdriver? I’m confused on how that works.

Nice video. How do you like the husky floor mat? Ive seen mixed reviews online.

What a shit design for such a small task.